Razor wire flat wrap coils are made of high tensile razor wire, clapped into a flat panel formation.
Installation Forms
- Flat wrap coils can be used in the following forms:
- Installed against the existing smooth wire mesh fence;
- Fitted to the welded mesh fence;
- Fitted by overlapping the fence mesh;
- Installed to the brick wall directly.
Advantages:
- Flat wrap coils will substantially improve the effectiveness of the fence. Installed on this basis, innocent persons are protected from injury by the smooth wire mesh fence while the potential intruders will get frightened back.
- he flat coils provide a neat but effective barrier when used together with mesh fences.
- Flat wrap coil installation is particularly simple when it is fitted by overlapping the fence mesh.
- It provides a high barrier when mounted to the wall.
-
Installation of flat wrap coil razor wire is simple when it is fitted.
-
500 mm high flat wrap fitted to our welded mesh fence provides a neat but effective barrier.
-
Installation of razor wire flat wrap coils is particularly simple when it is fitted by overlapping the fence mesh, shown here.
-
2 × 900 mm flat wrap installed against an existing smooth wire mesh fence substantially improves the effectiveness of the fence. Installed on this basis, innocent persons are protected from injury by the smooth wire mesh.
-
Many rolls of razor wire flat wrap coils
-
Many rolls of razor wire flat wrap coils
Razor Wire Flat wrap Specifications - Standard Coil Sizes
| Height |
Length |
Weight |
500 mm
(20 inch) |
15 m
(50 ft.) |
9.5 kg
(21 lbs) |
700 mm
(28 inch) |
15 m
(50 ft.) |
13 kg
(29 lbs) |
900 mm
(36 inch) |
15 m
(50 ft.) |
14.5 kg
(32 lbs) |
